Description of table cutting machine:
The series CNC plasma cutting machine is a kind of high efficiency steel plate automatic cutting equipment which is developed by our company in the process of absorbing advanced hardware and software technology at home and abroad. It can cut vertical and transverse straight line and can cut the arc curve at any side, cutting surface roughness and precision. High, small deformation. The machine has the advantages of reasonable structure, simple operation, advanced technology and so on.
Technical parameters :
Table type CNC plasma cutting machine |
||||
Model |
RM-T1325 |
RM-T1530 |
RM-T1560 |
|
Effective Cutting area WIDTH*LENGTH(m) |
1.5*3.0 |
1.5*3.0 |
1.5*6.0 |
|
Approximate Machine table board WIDTH*LENGTH(m) |
2.0*4.0 |
2.0*5.0 |
2.0*7.0 |
|
Width: 1.3m,1.5m, 1.8m Length:2.5~5m |
||||
|
||||
Cutting speed |
No-load speed: 20m/min without shake |
|||
|
Loading speed: 0~15m/min with high stability |
|||
Cutting thickness |
0~30mm with plasma / Specific cutting thickness depends on the plasma power Advice cutting <14mm metal; not advice support frame to bear too much weight |
|||
Drive motor |
Servo motors for driving |
|||
Arc THC |
HYD brand XPTHC-4H |
|||
Precision |
PRECISION HIWIN brand LINEAR RAIL, |
|||
|
Precious linear Square guide rail and linear guide rail; better than round guide |
|||
|
The linear tolerance of two guides on X axis is less than 0.05mm;X and Y axis vertical tolerance is less than 0.05mm; |
|||
Model |
plasma cutting (Main cutting model) |
|||
Usable Plasma power |
HUAYUAN brand 120A |
|||
Nesting software |
Fastcam software from Australia |
|||
Cutting platform |
INCLUDE |
|||
Gas-guide tube |
KOREA SAMSAN |
Machine pictures :
Cutting samples